Thin Carbon Fiber Sheets
Thin Carbon Fiber Sheets
Thin Carbon Fiber Sheets
Thin Carbon Fiber Sheets
Thin Carbon Fiber Sheets
Thin Carbon Fiber Sheets

Thin Carbon Fiber Sheets

Thin carbon fiber boards are ubiquitous, and the thinnest can be about 0.2 mm, which is only the thickness of one prepreg layer. A single layer of carbon fiber prepreg can make a thin carbon fiber board.

Send Inquiry

Product Introduction

Thin carbon fiber sheets are usually used as decorative sheets or in the reinforcement industry. It has an ultra-high tensile strength of carbon fiber and can be bent at a large angle. However, cannot be bent for a long time in actual use, and they may break even in normal use.

Why can't they be bent for a long time?

Internal reasons

Expired prepreg, or false performance, inadequate process, lack of experience, and inadequate molds and equipment during the production process will lead to a decrease in the mechanical properties of the carbon fiber sheets. The carbon fiber tows and the resin are not fully fused and compacted, and the internal structure of the sheet is unstable. Even if it is used within the load range, it will break

External reasons

Whether the load exceeds the range. The tensile strength of ordinary carbon fiber sheets can reach about 2500MPa, but in the field of industrial manufacturing, the load is not high. When facing such applications, carbon fiber sheets will naturally break, delaminate, or even crack

What should I do if the thin carbon fiber Sheets break?

If the ultra-thin carbon fiber sheet breaks, the continuous carbon fiber tow part loses its integrity and the performance also decreases. It is useless to only repair the appearance of this broken carbon fiber board. Performance is the basis of its application, so a new board needs to be replaced for continued use.

Typical Uses

This flexible carbon fiber board is suitable for furniture making, architectural detail design, etc., which can add a real carbon fiber appearance to most planes. It can easily follow single-plane curves, but like most carbon fiber boards, it will eventually break if bent too much.

Cutting process

Like other carbon fiber composites, cutting with regular workshop tools can give the board good results. These thin carbon fiber sheets can also be cut with strong scissors, and professional tools can reduce the workload and produce better results.

Your satisfactory service

A professional team of engineers and a first-class factory with high standards and requirements can provide you with high-quality customized services.

Website

https://www.hgcomposites.com

Tel

8525448418