Are surface scratches of carbon fiber products good to deal with?
Carbon fiber products are applied because of their performance, in addition to performance, the work of carbon fiber products is clean and clean and beautiful is also very good and popular, especially the carbon fiber pattern is a product that many friends who pursue personalized needs especially like, like many car modification parts will use carbon fiber material, which has high requirements for the pattern. Once the surface lines of carbon fiber products are scratched, you need to deal with the scratches, otherwise it will affect the actual price. As a carbon fiber products manufacturer, there are sometimes carbon fiber products with scratches on the surface, how are they treated? Let's take a look.
The normal lines of carbon fiber products will not have a problem, if the lines are more damaged, then there is no way to repair, then if the lines are lightly damaged, it can also be repaired, which is also divided into the call light highlight situation, highlight scratches
It's gonna be a little harder to fix. If there are slight scratches in the use of carbon fiber products, it is necessary to repair them by rough polishing first, so that the surface of carbon fiber becomes rough, and then convenient follow-up repair work. When polishing, a polishing work is completed through the cast iron plate, because the strength of carbon fiber products is very high. Therefore, it is necessary to make the carbon fiber products flat when the ground is light, and the entire ground surface is parallel to the polishing disc, which can make the entire ground surface stably polished on the rotating disk, from the center to the edge of the need for the ground surface to the scratch on the surface of the carbon fiber product, and the rough polishing is completed.
After rough polishing, is to carry out fine polishing, fine polishing is to use grinding paste for polishing, but also need to add suspension such as aluminum oxide for two-knife polishing process, the normal process is to first choose 2.5um diamond suspension wine on the medium fluff wool cloth, add a suitable emulsifying lubricant to reduce or avoid friction and wear. Polish on the polishing machine for 2-3min until all scratches caused by rough polishing are removed. Clean the polished surface with water or a solution containing cleaning agent after polishing.
In this way, even if the entire earth light process is completed, the carbon fiber products after polishing are basically difficult to see scratches, and there will be no big problems, the carbon fiber products after the approval of light, but also need to use carbon fiber repair, which requires very good technical requirements, need to have a certain technology, we are a professional production of carbon fiber products manufacturers, If there is any need, please come to consult.
