Understand the functionalization of carbon fiber auto parts

One of the characteristics of carbon fiber auto parts is that it can be processed into different forms according to the requirements of use, such as felt, cloth, paper and honeycomb. The unit area of carbon fiber auto parts felt is about 100-300g·m-2, and the volume density is only one tenth of that of GAC, which is its characteristic and advantage. Because of its fast adsorption and desorption speed, it can greatly shorten the length of the adsorption strip, which is very suitable for the solvent recovery device. Carbon fiber automotive parts cloth can provide continuous conductive carbon, has good electrical storage capacity, can be heated through resistance to keep it constant at any uniform temperature, achieve rapid heating and cooling. Therefore, in addition to capacitors, electrodes, nuclear fuel batteries, in need of electric heating and use of adsorption properties applied in some special systems. Carbon fiber auto parts paper folding processing, will not form carbon dust, easy to process into dust removal and deodorization materials. The honeycomb adsorbed layer, made from carbon fiber auto parts paper, has a low pressure loss because the adsorbed gas flows through the thin tubes of the paper rolled into layers in parallel directions. It does not produce dust, strong shock resistance, light weight, can be arbitrarily changed shape it is used to remove office equipment, medical analysis instruments and other high voltage discharge or high energy electromagnetic wave under the action of the toxic ozone. It is composed of adsorption device can concentrate low concentration gas into high concentration, suitable for large air volume operation, used in paint industrial solvent exhaust recovery.