Aluminum Honeycomb Core Panels
Aluminum Honeycomb Core Panels
Aluminum Honeycomb Core Panels
Aluminum Honeycomb Core Panels
Aluminum Honeycomb Core Panels
Aluminum Honeycomb Core Panels

Aluminum Honeycomb Core Panels

Name: China Aluminum Honeycomb Core Panels Manufacturers Suppliers Factory - Customized Service
Brand: High Gain
SKU: 258522856

The aluminum honeycomb core panels have strong structure. Both the skin and the honeycomb core are made of high-strength aluminum alloy honeycomb core panels. These dense honeycombs that are mutually inclusive can disperse the pressure on the surface of the panel. A thin layer of adhesive is applied to the surface of the aluminum panel to firmly bond the honeycomb core to the upper and lower skins.

Send Inquiry

Product Introduction

Aluminum honeycomb core panels have many performance advantages

01.Lightweight

The standard panel weighs only 16kg per square meter, which is equivalent to 6mm thick glass and only 1/5 of the weight of stone of the same thickness.

02.Impact resistance

The impact resistance is 10 times greater than that of 3mm thick granite, and the entire piece will not break after impact, only part of the impact will be broken. After 120 cycles of acid freeze-thaw test (-25~50 degrees Celsius), the strength has not decreased at all, making it a good decorative material for high-rise buildings.

03.The surface can be made of any kind of stone.

The stone can be treated in any way to ensure that color differences, cracks, etc. are reduced to a certain extent.

04.Easy to install

This product is extremely convenient to install and can be pre-installed according to customer requirements. Generally, no large-scale installation equipment is required. At a lower level, only simple tools are needed to complete the installation. This product is suitable for modular unit curtain wall installation.

05.Good sound insulation and heat insulation

The standard panel specifications are 1200mm x 2400mm, and the thickness is: standard panel 20mm, stone thickness 4mm, aluminum honeycomb thickness 14mm, high-strength transition layer, and glue layer thickness 2mm in total.

Aluminum honeycomb core panels have the above advantages, and their market demand is also expanding and diversifying. They are widely used in building decoration curtain walls, furniture, automobiles, high-speed rail, ships, aviation, energy and other fields. The market demand is still gradually increasing in the future. Aluminum honeycomb composite panels have higher resistance to wind pressure deformation and stronger rigidity. With the rapid development of the transportation and construction industries in the future, the industry is very optimistic about its future application prospects.

What are the factors affecting the peeling of aluminum honeycomb panels?

1. Influence on the production process

A hot press is used to produce aluminum honeycomb core panels. Since the pressure of the hot press is large and difficult to control, pads are often placed to prevent the collapse of the aluminum honeycomb core. If the pad is high, it will affect the applied pressure and lead to low bonding strength. If a flat hot composite machine is used, since the pressure is provided by elastic force, the applied pressure can be controlled by adjusting the height. Therefore, the bonding strength of the aluminum honeycomb panels produced by this process is high and very stable.

2. Influence of surface conditions

The oil, dirt, and naturally formed loose oxide layer on the aluminum surface will seriously affect the bonding effect of the aluminum honeycomb panel. Therefore, it must be cleaned and pretreated. The aluminum surface can be treated with phosphating or chromizing to form a tight chemical conversion film on the aluminum surface. The aluminum has a good bonding effect after treatment.