The Biggest Advantage Of Carbon Fiber Auto Parts Can Be Processed in Which?

1, carbon fiber auto parts poor thermal conductivity, in the process of drilling drill and composite materials produce a lot of friction heat, and carbon fiber auto parts thermal conductivity is small, heat is difficult to exclude in the processing makes the cutting temperature rise, accelerate the wear of the bit. In the drilling technology of carbon fiber auto parts, some measures must be taken to prevent material damage in the process of processing.
2, carbon fiber auto parts secondary processing including hole processing, special shape cutting processing, blind groove processing, surface grinding processing, but no matter what type of processing and cutting processing will appear other situations, such as drilling layering, accelerated tool wear and so on.
3, carbon fiber auto parts in the interlayer strength is low, in the process of drilling, if the composite component of the drilling axial force is too large, resulting in excessive interlayer stress, more than the strength of the matrix resin will cause defects such as stratification. Carbon fiber auto parts belong to anisotropic materials, the fiber layering direction has a great influence on the hole making, especially the unidirectional plate hole making, the stress at the hole is concentrated and large, which is easy to cause splitting.